Template:BSoD
This is a template designed to display a Blue Screen of Death without an image and therefore it also optimizes support for screen readers reading it.
Note: The no-image Windows NT BSoD is currently a work-in-progress. The original image is available at .gif)
| NT | 9x | 2k | XP | |
|---|---|---|---|---|
| 01 |
STOP: 0x00000019 (0x00000000,0xC00E0FF0,0xFFFFEFD4,0xC0000000) CPUID: GenuineIntel 5.2.c irql:1f SYSVER 0xf0000565 {
|
A fatal exception 0E has occurred at 0028:C0011E36 in VXD VMM(01) + 000010E36. The current application will be terminated.
Press any key to continue _
|
INACCESSIBLE_BOOT_DEVICE If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Refer to your Getting Started manual for more information on troubleshooting Stop errors.
|
A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: SPCMDCON.SYS PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information:
|
| 17 |
STOP: 0x00000019 (0x00000000,0xC00E0FF0,0xFFFFEFD4,0xC0000000) CPUID: GenuineIntel 5.2.c irql:1f SYSVER 0xf0000565 {
|
A fatal exception 0E has occurred at 0028:C0011E36 in VXD VMM(01) + 000010E36. The current application will be terminated.
Press any key to continue _
|
INACCESSIBLE_BOOT_DEVICE If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Refer to your Getting Started manual for more information on troubleshooting Stop errors.
|
A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: SPCMDCON.SYS PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information:
|
| AA |
AAAA: AAAAAAAAAA (AAAAAAAAAA,AAAAAAAAAA,AAAAAAAAAA,AAAAAAAAAA) AAAAA: AAAAAAAAAAAA A.A.A AAAA:AA AAAAAA AAAAAAAAAA {
|
A AAAAA AAAAAAAAA AA AAA AAAAAAAA AA AAAA:AAAAAAAA AA AAA AAA(AA) + AAAAAAAA! AAA AAAAAAA AAAAAAAAAAA AAAA AA AAAAAAAAAA!
AAAAA AAA AAA AA AAAAAAAA _
|
AAAAAAAAAAAA_AAAA_AAAAAA AA AAAA AA AAA AAAAA AAAA AAA'AA AAAA AAAA AAAA AAAAA AAAAA, AAAAAAA AAAA AAAAAAAA! AA AAAA AAAAA AAAAAAA AAAAA, AAAAAA AAAAA AAAAA: AAAAA AAA AAAAAAA AA AAAA AAAAAAAA! AAAAAA AAA AAAAA AAAAAAAAA AAAA AAAAAA AA AAAA AAAAA AAAAAAAAAAA! AAAAA AAAA AAAA AAAAA AA AAAA AAAA AA AA AAAAAAAA AAAAAAAAA AAA AAAAAAAAAA! AAA AAAAAA /A AA AAAAA AAA AAAA AAAAA AAAAAAAAAA, AAA AAAA AAAAAAA AAAA AAAAAAAA! AAAAA AA AAAA AAAAAAA AAAAAAA AAAAAA AAA AAAA AAAAAAAAAAA AA AAAAAAAAAAAAAAA AAAA AAAAA!
|
A AAAAAAA AAA AAAA AAAAAAAA AAA AAAAAAA AAA AAAA AAAA AAAA AA AAAAAAA AAAAAA AA AAAA AAAAAAAA! AAA AAAAAAA AAAAA AA AA AAAAAA AA AAA AAAAAAAAA AAAA: AAAAAAAA.AAA AAAA_AAAAA_AA_AAAAAAAA_AAAA AA AAAA AA AAA AAAAA AAAA AAA'AA AAAA AAAA AAAA AAAAA AAAAA, AAAAAAA AAAA AAAAAAAA! AA AAAA AAAAA AAAAAAA AAAAA, AAAAAA AAAAA AAAAA: AAAAA AA AAAA AAAA AAA AAA AAAAAAAA AA AAAAAAAA AA AAAAAAAA AAAAAAAAA! AA AAAA AA A AAA AAAAAAAAAAAA, AAA AAAA AAAAAAAA AA AAAAAAAA AAAAAAAAAAAA AAA AAA AAAAAAA AAAAAAA AAA AAAAA AAAA! AA AAAAAAAA AAAAAAAAA, AAAAAAA AA AAAAAA AAA AAAAA AAAAAAAAA AAAAAAAA AA AAAAAAAA! AAAAAAA AAAA AAAAAA AAAAAAA AAAA AA AAAAAAA AA AAAAAAAAA! AA AAA AAAA AA AAA AAAA AAAA AA AAAAAA AA AAAAAAAA AAAAAAAAAA, AAAAAAA AAAA AAAAAAAA, AAAAA AA AA AAAAAA AAAAAAAA AAAAAAA AAAAAAA, AAA AAAA AAAAAA AAAA AAAA! AAAAAAAAA AAAAAAAAAAA:
|
| en |
STOP: 0x00000019 (0x00000000,0xC00E0FF0,0xFFFFEFD4,0xC0000000) CPUID: GenuineIntel 5.2.c irql:1f SYSVER 0xf0000565 {
|
A fatal exception 0E has occurred at 0028:C0011E36 in VXD VMM(01) + 000010E36. The current application will be terminated.
Press any key to continue _
|
INACCESSIBLE_BOOT_DEVICE If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Refer to your Getting Started manual for more information on troubleshooting Stop errors.
|
A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: SPCMDCON.SYS PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information:
|